Find tempo-synced delay times, reverb starting points, and modulation rates.
A free VitalSynth tool for any DAW or plugin. Independent; not affiliated with or endorsed by Vital Audio.
This calculator needs JavaScript. Turn it on in your browser to calculate values for your tempo.
Or work it out by hand: one quarter note lasts 60000 ÷ BPM milliseconds. Multiply by 4 for a whole note, halve it for an eighth, ×1.5 for dotted, ×2/3 for triplet. Rate in Hz is 1000 ÷ milliseconds.
60000 ÷ BPM ms. At 120 BPM that is 500 ms.quarter × 4 ÷ note, so a 1/8 is half a quarter and a whole note is four quarters.1000 ÷ ms. It tells you how many times per second something repeats, which is what an LFO or tremolo rate means. It is not a pitch, a filter cutoff or an EQ frequency.quarter × beats per bar × 4 ÷ beat unit. A 6/8 bar holds three quarter notes, so at 120 BPM it lasts 1500 ms, the same as a 3/4 bar.window − pre-delay. The default pre-delay is a 1/64 note (31.25 ms at 120 BPM), a short gap that keeps the start of the sound clear of the reverb. Change it or turn it off.Values are shown to two decimals in ms, three or four in Hz and seconds, and copied with up to four decimals (six for seconds). Calculations always use the full value, never the rounded display.
Select any value in the delay table, then pick a Vital control under Use in Vital. The calculator shows the tempo-sync setting to choose, if the control has one, and the exact number to type. The Reverb budget view does the same for Vital’s reverb.
Vital’s delay, LFOs, chorus, flanger and phaser can follow your project tempo. Their rate controls have sync modes for straight (Tempo), Tempo Dotted and Tempo Triplets. Synced values stay in time if you change the song’s tempo, so use them where they exist. Vital applies the same dotted (×1.5) and triplet (×2/3) rules as this calculator.
Any Vital knob accepts a typed value: right-click it and choose Enter Value, or Option-click (Alt-click on Windows). For time and rate controls Vital reads the number in seconds, the same unit it displays. A rate in free mode is entered as the length of one cycle, which is why the calculator gives seconds rather than Hz for Vital.
Ranges and the Enter Value option come from Vital’s published source code, checked 18 November 2026, with parameter names confirmed in a preset saved by Vital 1.5.5. On-screen knob labels may be shorter than the names used here.
Divide 60,000 by the BPM to get one quarter note in milliseconds: at 120 BPM that is 500 ms. Multiply by 4 for a whole note, halve it for an eighth, multiply by 1.5 for dotted or by 2/3 for triplet.
Straight repeats land on the grid and sound tight. Dotted repeats (×1.5) fall between beats and create the familiar rolling, syncopated echo. Triplet repeats (×2/3) give a swung, three-against-two feel. Try a dotted 1/8 on a lead and a straight 1/4 on a vocal as starting points.
Most DAWs and plugins, including Vital’s tempo sync, count tempo in quarter notes. Keeping that one rule means a 1/8 is always the same length whatever the time signature. The meter only changes how long a bar is. If your track is felt in dotted quarters, multiply that tempo by 1.5 to get the quarter-note BPM before entering it.
Choose how long the reverb should take to settle, for example one bar, and set the pre-delay. The decay budget is what is left. Set your reverb’s decay near that value, then adjust by ear until the tail clears before the next phrase. It is a tempo-alignment guide, not a measurement of a real room, and a plugin’s decay control may not mean the same thing as the budget.
It is how many times per second the note value repeats, useful for LFO, tremolo, auto-pan and gate rates. A 1/4 note at 120 BPM repeats twice a second, so 2 Hz. It is not a musical pitch.
Use tempo sync first: Vital’s delay, LFOs, chorus, flanger and phaser have Tempo, Tempo Dotted and Tempo Triplets modes that follow your project. For a fixed time, right-click the knob, choose Enter Value and type the number in seconds (Option-click or Alt-click also opens the box). Select a value above and pick a control under Use in Vital to get both settings.
No. Vital’s reverb has no tempo sync, so type the values instead: its pre-delay (labelled Delay) accepts 0 to 0.3 seconds and its Time about 0.016 to 64 seconds. Use the Reverb budget view to get both, then fine-tune Time by ear.
Vital’s published source code sets a 4-second delay buffer. Long synced settings at slow tempos, such as a dotted whole note at 60 BPM (6 seconds), go past that, so pick a shorter division or use another delay plugin.
It averages the time between your last eight taps and ignores taps that are far off the typical gap, so a single stumble does not throw off the result. A pause of more than three seconds starts a new count. It measures your tapping, not the audio: for an exact tempo, use your DAW’s project tempo or its tempo detection. If the result is half or double what you expect, use the Half or Double buttons. The tool never changes it on its own.
Your last tempo, time signature and unit are saved in your browser only, if your browser allows it. Nothing is sent anywhere, and there are no cookies.
The form has been successfully submitted.
We will review your software soon!
See you soon.