How to find the BPM of a song

  1. Play the track and find its steady pulse: usually the kick drum, or the beat you'd nod your head to.
  2. Tap the TAP TEMPO button on each beat, or click the counter and press Space. A first estimate appears after two taps.
  3. Keep tapping for a few bars. The counter averages your last eight taps, so the number settles as you go.
  4. If the result is twice or half what you feel, press ÷2 or ×2.
  5. Copy the tempo, save it with a name, or share it as a link.

How the tempo is worked out

Each tap is timed in your browser. The counter takes the gaps between your last eight taps, averages them, and divides one minute by that average.

BPM = 60,000 ms ÷ average gap between taps
Taps 500 ms apart: 60,000 ÷ 500 = 120 BPM

After five taps you also see how even your tapping is: Steady when the gaps vary by about 4% or less, A little uneven up to 10%, and Uneven beyond that. That describes your tapping, not the song. A track can swing, drift or change tempo, so treat the number as a close estimate.

Stop for more than three seconds and your next tap starts a new measurement. The last result stays on screen as “Previous”.

Half time or double time?

Most music can be felt at two speeds. A groove you tap at 85 BPM might be written at 170, and something you tap at 140 might be counted at 70. Neither answer is wrong. Pick the one that matches your project, or the way the bar is counted. Use ÷2 or ×2 and keep tapping: the counter keeps that scaling until you reset or pause.

Turn BPM into note lengths

Delay times, LFO rates and gate lengths are often set in milliseconds. Start from the quarter note:

Quarter note (ms) = 60,000 ÷ BPM
Eighth = quarter ÷ 2 · Sixteenth = quarter ÷ 4
Dotted = × 1.5 · Triplet = × 2/3
Quarter-note rate (Hz) = BPM ÷ 60

Note lengths at 120 BPM
NoteMilliseconds
Whole2,000
Half1,000
Quarter500
Dotted eighth375
Eighth250
Eighth triplet166.67
Sixteenth125

Open Producer helper under the counter to see the quarter note for your own tempo.

Using your tempo in Vital

Set your DAW project to the tempo you found. Vital's tempo-synced LFOs and effects follow the host tempo, so wobbles, gates and echoes line up with the track you're working with. If you'd rather set a rate by hand, the millisecond and hertz figures above give you the matching value.

Tap without distractions

  • Focus mode hides the rest of the page and shows only the counter.
  • Fullscreen hides the browser's own toolbars too, where your browser allows it.
  • Pop out opens the counter in a small separate window, so you can keep it beside your DAW. Some browsers open a tab instead.
  • Keys: Space or Enter taps, R resets, Esc leaves focus mode.

BPM Counter FAQ

Is the BPM Counter free?

Yes. It's free, needs no account, and runs entirely in your browser. Your taps are never uploaded.

Does it listen to the music?

No. It's a manual tap-tempo tool: you tap along and it times your taps. It doesn't use your microphone or analyse audio files.

How many taps do I need?

You get a first estimate after two taps. Keep tapping for a few bars and the number settles, because the counter averages your last eight taps. More taps only help if they stay even.

Why does my BPM keep changing?

Usually because the gaps between taps vary, or because the music swings or changes tempo. Keep tapping steadily, or pause for three seconds and start a fresh measurement.

Can I save or share a tempo?

Yes. You can save up to 20 named tempos, which stay in this browser on this device. Share creates a link that opens the counter showing your tempo, labelled as a shared tempo.

Can I use it with the keyboard?

Yes. Click the counter first, then press Space or Enter on each beat. R resets, and Escape leaves focus mode. Keys only work while the counter has focus, so typing elsewhere on the page is never counted.